locking assemblies are most suitable for securing all types of bosses and hubs shaft axles
Packaging Type
single
Surface Finishing
cg
Length
48 to 174 mm
Weight
.24gm to 146 kg
Coating
as well as supplied with different surface coatings like zinc plating, nickel plating and phosphate
Dimensions
id 14mm to id 400mm
Grade
Set of socket head cap screws, grade 12.9
Hardness
as per DIN standard
Product Size
0.5 Inch
Country of Origin
Made in India
Locking Assembely Provide an excellent centering of the connection. Concentricity and perpendicularity range from 0.02 mm to 0.05 mm. Self-centering characteristic depends onlength and taper angle, manufacturing process and proper installation.If the locking assembly is not self-centering, a pre-centering hub section is needed in order toobtain an excellent centering of the connection.Self-locking units ensure the transmission of loads even in case of loosening of the screws. Inaddition, the screws are not subject to dynamic stress (typical when bending moment applies),which causes fatigue failure. Self-locking characteristic depends on taper angle.Removal of self-locking units is obtained by means of integrated push-off threads. Removal ofself-releasing units is obtained by loosening the locking screws.
